MOTOR CONTROL CENTER

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

A motor control center (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centers are in modern practice a factory assembly of several motor starters. A motor control center can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building. Motor control centers are usually used for low voltage three-phase alternating current motors from 208 V to 600 V. Medium-voltage motor control centers are made for large motors running at 2300 V to around 15000 V, using vacuum contractors for switching and with separate compartments for power switching and control.

For more details visit :- http://www.pragathicontrols.com/

Advertisements

PLC CONTROL PANEL

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

 

A programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory. A PLC is an example of a hard real time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result.

VISIT OUR WEBSITE: http://www.pragathicontrols.com/

AMF PANEL

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

 

AMF panel is the short form of Auto Man Failure panel. It is normally connected to the generator set to control the generator set function. It can call the generator set if the AMF further connected to the Main Switch Board ( received power from the other source – normally from the local authority ) which equipped with auto transfer switch/automatic changeover contactor. While normal supply serve to main switch board failed, the AMF board will send the power failure signal to generator set. Then the generator set will run and serve the supply to main switch board.

VISIT OUR  WEBSITE: http://www.pragathicontrols.com/

 

DG Synchronizing HT/LT Panel

Image

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

The packaged combination of a diesel engine, a generator and various ancillary devices (such as base, canopy, sound attenuation, control systems, circuit breakers, jacket water heaters and starting system) is referred to as a “generating set” or a “genset” for short.
Set sizes range from 8 to 30 kW (also 8 to 30 kVA single phase) for homes, small shops & offices with the larger industrial generators from 8 kW (11 kVA) up to 2,000 kW (2500 kVA three phase) used for large office complexes, factories. A 2,000 kW set can be housed in a 40 ft ISO container with fuel tank, controls, power distribution equipment and all other equipment needed to operate as a standalone power station or as a standby backup to grid power.

Power Control Center

Image

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

In 1979, Controlled Power, LLC recognized the need for an innovative method for packaging electrical equipment for installation outside the customers’ facilities. Power Control Centers are modular, climatized buildings that are designed, wired, tested, and completely factory assembled, with electrical equipment installed inside.