Plc Control Panels Manufacturers

Pragathi Controls Pioneers in Plc Control Panels Manufacturers. Programmable logic controller (PLC) control panels or also known as PLC Automation Panel are one of the most important and efficient kinds of control panels. PLC Control Panels we manufacture are highly capable of giving higher output at less power consumption. Which are generally used in variety of electronic and electrical circuit fittings. Integrated with solid PLC logic and flawless PLC hardware programming.

Ease in modification of logic, means of remote communications, reduced size and advances in the technology have made PLC Automation Control Panels an edge over conventional relay based systems. With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided to effective control of the system.

 

slide6

We are involved in the Electrical Control Panels Manufacturers. Our company have the technological expertise personnel to meet any type of requirement of electrical panels and to interact with clients / consultants. Our company have the technological expertise personnel to meet any type of requirement of electrical panels and to interact with clients consultants.

A History of Plc Control Panels Manufacturers

 

Programmable Logic Controllers (PLC) was originally fictional for the U.S. automotive producing business to exchange relay logic systems. The automotive business adopted Plc Control Panels Manufacturers an initio for code revision that replaced rewiring of management panels was used throughout the ever-changing of production models. Before PLC, the method to vary and update facilities for its new model every year was terribly pricy and time-intensive since every relay had to be one by one rewired.

In 1986, weight unit requested a proposal for a tool that might electronically modification this relay system Winning this project bid Dick Morley of Bed-ford Associates is understood because the “father” of the PLC with their 084 PLC because the initial product of its kind. Bedford Associated supported the corporate oral contraceptive to assist promote and repair its 084 PLC, that was later sold-out to the German company currently referred to as AEG. Schneider electrical in France is currently this owner of Modicum’s 084 PLC. The Plc Control Panels Manufacturers is currently an important a part of several producing industries saving hours of your time and thousands of bucks, however the automotive business continues to be maybe the most important PLC user.

PLC Functions & System Tools

PLCs primary perform is to electronically wire the hard-wired management panels that, otherwise, need that every of the whole bunch and even thousands of relays get replaced one by one. PLCs settle for knowledge from switches, sensors and controls to regulate and drive numerous machines and devices. PLC functions have distended from its basic replacement of relay logic circuits to a lot of advanced options involving PIP implementation. The advantages and functions of the PLC area unit currently found in industries on the far side automotive producing, as well as food process, mining and surroundings management.

Early PLCs were programmed to agree a schematic style of relay logic (known as ladder logic) to assist cut back the coaching needed for technicians, although some used a lot of associate degree instruction list style of programming. Plc Control Panels Manufacturers nowadays could take the shape of this ladder logic or state logic, a way more complicated programming language. Ladder logic is a lot of usually used nowadays as a result of it permits the PLC technologist to a lot of simply discover problems with temporal order of the logic sequence. PLCs nowadays area unit programmed used laptop code that functions conjointly as a troubleshooting tool for the PLC code.

PLC functions have evolved since the 084 to incorporate motion management, serial relay management, method management, networking and distributed management systems. Today, PLC knowledge handling, storage, communication tools and process power is capable that of a personal computer. In fact, there are unit desktop logic applications that once combined with IO hardware will overlap some PLC functions, which can be a lot of useful in smaller facilities or less crucial circumstances. The advantage to PLCs within the style of a desktop logic application is mostly the lower price.

However, usefulness is one space preventing some industries to still not however totally adopt PLCs, notably the serious business makers because of considerations over personal computer longevity, price and sturdiness in humidness, harsher temperatures and fewer stable environments. Evidently, the PLC has remodeled from its original functions to the lot of economical PLCs employed by industries nowadays. Developers have conjointly branched far away from the Plc Control Panels Manufacturers with introduction of Programmable Logic Relays (PLRs), giving similar functions because the PLC with constant goal in mind.

Highly economical Electrical Control Panels Used for observance Instruments

logo

 

Remember those colorful buttons and displays that layers any typical 80’s B Villain’s den? And how the typical bald, scar adorned, roughneck would press the red button at the slightest hint of the hair-suit mad scientist Dr. X?

Well, that is the Control Panel, a very good example in fact. In the simplest of words, a Control Panel (also known as Electrical Control Panels, Power Distribution Boards, Service Panels and Panel-boards) is a flat surfaced, horizontal or vertical board covered by control or monitoring instruments that is used to supply electricity to the countless applications and equipment involved in a system or project. Control panel are seen in a variety of sizes, shapes specifications and encompass a wide range of types. Right from a normal mechanical panel with a few buttons and displays to complex and intricate modern sound and consoles – all fall in this category.

These panels are seen in almost every industry or wherever any project is being executed. A primary element, it facilitates in keeping a track of all the process at a single desk. Originally, these panels were equipped with switches and push buttons and other analogue instruments but now these are being replaced by automated and touch screen displays.

It consists of a capital console and several sub panels, along with a numerous indicator lights. The fuses and the circuit breakers are integrated in the Console. In the contemporary versions, transformers are omitted to facilitate in the current supply at a voltage lower than that of the main supply. These types of panels are highly efficient, esp. in situations where several equipment with varied power requirements are amalgamated in a single circuit.

Although in this century innovation and cutting edge technology, a wide variety of Electrical Control Panels are available with countless technical integrations and digital displays, a typical control panel consists of the following parts:

  • Housing – The outer cover that houses all the switches, displays and lights. It is generally fabricated from plastic or metal coated with insulated paint, so as to eliminate all chances of short circuit or electric shock.
  • Main Disconnect – A very integral part of any Control Panel, the central power controlling switch of the entire unit. Its function is of crucial importance in case of any short circuit or overload.
  • Circuit Breakers – As the Main Disconnect is switched on, the power flows through it to several circuit breakers. These little components function by tripping down automatically in case of power overload or fluctuation. Thus, these devices eliminate the risk of excess overheating of the unit, which might lead to fire hazards.

Today, it is mandatory that almost all Electrical Control Panels available in the market are stamped QC Passes by their respective Manufacturers. Still a few factors that should be checked before purchasing it can be summed up as:

  • Resistance to changing weather.
  • Safety standards.
  • Temperature bearing capacity of the controllers.
  • Quality of circuit breakers.
  • Inclusion of voltmeter and integrated main switch fuse unit.

Electrical Control Panels Manufacturers

 

We are glad to introduce our self as leading Electrical Control Panels Manufacturers and supply of electrical distribution panels and relay panels for industrial, residential apartments, commercial, Agricultural sectors and other organizations. We have catered to several organizations in the past and have a good work relation with all of them with no complaints from our clients. We offer you better services that are of the highest standard and at extremely competitive rates.

 

Our Electical Control Panels is well equipped with high-tech machineries and qualified personnel having expertise in control panel design, project planning, panels manufacturing and development, testing & commissioning of all types of electrical panels.

 

We are leading in Synchronising Panels Manufacturers. The range of DG Synchronization Panels comes complete with Controlling & Protection Relays capable of synchronizing of more than one DG sets / with Mains & DG and with necessary protections. Our company offer the DG Synchronization Panels at affordable rates to clients.

: Power Control Center

            :: Motor Control Center

           :: DG Synchronizing HT/LT Panel(with PLC/ Auto)

  • :: PLC Control manufacturers
    :: AMF Panel
    :: Bus Duct Up to 6000A(Conventional Type)
    :: Enclosure for Standard Panel
    :: Automatic Power Factor Improvement Panel DG Synchronization Panel
    :: Fire Pump Panel
    :: Automatic Street Light Switching Panel
    :: Sub Station ¡VIndoor/Outdoor Panel (LV/MV)
    :: Floor DB¡¥s
    :: Control & Relay Panel
  • OURPRODUCTRANGE

MOTOR CONTROL CENTER

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

A motor control center (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centers are in modern practice a factory assembly of several motor starters. A motor control center can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building. Motor control centers are usually used for low voltage three-phase alternating current motors from 208 V to 600 V. Medium-voltage motor control centers are made for large motors running at 2300 V to around 15000 V, using vacuum contractors for switching and with separate compartments for power switching and control.

For more details visit :- http://www.pragathicontrols.com/

PLC CONTROL PANEL

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

 

A programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory. A PLC is an example of a hard real time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result.

VISIT OUR WEBSITE: http://www.pragathicontrols.com/

AMF PANEL

Pragathi Controls has been at the forefront of excellence in Electrical Industry, manufacturing of LT & HT Switchboards, MCC¡¦s, PCC¡¦s, Bus Ducts, Relay & Control Panels & PLC Panels

Image

 

AMF panel is the short form of Auto Man Failure panel. It is normally connected to the generator set to control the generator set function. It can call the generator set if the AMF further connected to the Main Switch Board ( received power from the other source – normally from the local authority ) which equipped with auto transfer switch/automatic changeover contactor. While normal supply serve to main switch board failed, the AMF board will send the power failure signal to generator set. Then the generator set will run and serve the supply to main switch board.

VISIT OUR  WEBSITE: http://www.pragathicontrols.com/